Product category:
AC/DC Power Supplies
News Release from: PowerDsine UK
Edited by the Electronicstalk Editorial
Team on 26 June 2003
Standard to accelerate power over
Ethernet
PowerDsine has welcomed the approval by the Institute of Electrical and Electronic Engineers of standard 802.3af-2003, which defines the specifications to deliver power over standard Ethernet cables.
PowerDsine has welcomed the approval by the Institute of Electrical and Electronic Engineers (IEEE) of standard 802.3af-2003, which defines the specifications to deliver power over standard Ethernet cables PowerDsine has been a major contributor to the 802.3af Task Force, and participated in the call for interest in the 802.3 Working Group in 1999
This article was originally published on Electronicstalk on 14 May 2003 at 8.00am (UK)
Related stories
Power over LAN supply shrinks to DIMM format
PowerDsine has released its new Power over LAN dual inline memory module (PoL-DIMM) technology, based on its embedded, IEEE 802.3af-compliant Power over LAN ASIC.
Power over Ethernet works with IP-based cameras
PoE Midspan and Active Splitter solutions from PowerDsine have been tested and certified with Sony's IP-based video cameras.
The standard was approved by the IEEE Standards Board on 12th June 2003, and will be published on or before 11th July 2003, as "802.3af-2003".
PowerDsine, has played a significant role in the creation of the standard, and has also pioneered a service to Ethernet device manufacturers and switch vendors to test conformance with the provisional standard.
To date, over one hundred terminal devices have been compliance tested by PowerDsine, including most of the leading voice over Internet protocol (VoIP) phones, wireless LAN access points and IP security cameras.
Further reading
Connector embeds power over Ethernet
Tyco Electronics and PowerDsine have delivered the industry's first RJ45 connector with built in PoE.
PoE hub powers up WLAN access points
The PowerDsine 3001 PoE Midspan is a one-port power hub which is fully compliant with the IEEE802.3af PoE standard.
PoE chip powers up desktop switch
Netgear is using PowerDsine's IEEE802.3af compatible PD64004 PoE solution in its newly released ProSafe eight-port 10/100 desktop switch with four-port PoE.
"The 802.3af standard will provide the first global standard for power", stated Steve Carlson, Chair of the 802.3af Task Force, "Thousands of new and innovative products will emerge to take advantage of having the proven robustness and reliability of Ethernet along with power on the same connector.
In ten years no one will be able to remember when Ethernet ports didn't supply power".
Richard Webb, Market Analyst for Infonetics Research, commented: "The 802.3af standard provides a stable basis from which vendors can continue to reduce the cost of installing and upgrading network devices; this can be a hidden cost in the deployment and scaling-up of wireless LANs and VoIP in particular, and so improves the investment case for both these technologies.
PowerDsine's strong contribution to this standard shows them to be the key innovator in the power over Ethernet field".
"The standard ratification will add extra impetus to the current trend amongst silicon vendors to design chipsets for laptops and portables that require low power consumption below the 12.95W prescribed in the power over Ethernet standard", said Amir Lehr, Vice President, Business Development and Strategic Planning at PowerDsine.
"As these devices become less power-hungry and power over Ethernet becomes the standard in most corporate IT environments there will no longer be a need for business people to carry a variety of different plugs when travelling.
Instead the RJ45 jack will become the universal power jack.
I confidently predict that in the next five years more than 75% of enterprise network devices will be able to be powered by Ethernet".
Power over Ethernet is already widely adopted in the market, particularly in the VoIP, wireless LAN and IP security market where it saves up to 50% of the overall installation costs by eliminating the need to install separate electrical wiring and power outlets.
Its other major advantage, particularly for IP telephony and surveillance camera users, is the ability to offer continuous operation even in the event of a power failure by delivering battery-backed uninterrupted power via the local area network (LAN).
Power over Ethernet has been widely deployed in two formats either as endspan devices, ie embedded into switches, or as stand-alone midspan hubs from companies such as PowerDsine, allowing terminal devices to be power-enabled without upgrading the existing switches.
The new standard will cover both categories of power over Ethernet technology.
Yair Darshan, Chief Engineer at PowerDsine adds, "A great deal of attention, analysis and field tests were invested in the standard in regard to system design aspects to ensure reliable and robust operation of the system functions.
This was the base of this technology which boasts business benefits that have already seen widespread deployment.
The standard ratification provides extra momentum as it provides companies with investment protection in the knowledge that they won't be tied into any one vendor.
It's also likely to be a spur to exciting new product innovations".
• PowerDsine UK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
