Source suits laboratory and industrial uses

Edited by the Electronicstalk editorial team Jan 20, 2005

A new AC/DC power supply combines a ruggedised input section with extremely low noise outputs, making it an ideal power source for medical laboratory and industrial applications.

The 1200W HPF5A2AFAFH6 AC/DC power supply combines a ruggedised input section with extremely low noise outputs, making it an ideal power source for medical laboratory and industrial applications.

Operating over an input range of 85 to 264V AC, this EN60555 compliant 0.99 PFC product has undergone extensive input-transient testing.

EN61000 categories covered include ESD immunity (4-2 level 4), RF susceptibility (4-3 level 3), fast transient/burst (4-4 level 3), and surge immunity (4-5 class 4 line-line and 4-5 line-ground class 4).

Four fully isolated and regulated outputs provide 5V at 150A and 3.3V at 60A to power a system bus and/or directly power semiconductors, and two low-noise (less than 35mV peak-to-peak) 15V at 16A outputs for analogue devices such as sensors and operational amplifiers.

The 127 x 203 x 280mm chassis is available with SAE or metric mounting inserts.

Safety agency approvals include UL60950/CSA 22.2 No 60950 3rd Edition, EN60950 (TUV), and IEC60950.

Pricing for the HPF5A2AFAFH6 is $1856 each in quantities of 25.

Evaluation units are available in two to six weeks.

Production quantities are typically available in eight to ten weeks.

The HPF5A2AFAFH6 uses a modular architecture that provides a wide variety of migration paths, using the same size chassis, should voltage and current requirements change.

More than 85 different output modules are available in addition to a comprehensive selection of chassis rated from 1000 to 4000W.