Product category:
Memory Devices and Modules
News Release from: Ramtron International | Subject: FM1105/
Edited by the Electronicstalk Editorial
Team on 05 June 2007
Nonvolatile state saver brings system
stability
Novel nonvolatile device saves the state of signals on demand and restores them to the correct state automatically on power up.
Ramtron International Corp has developed the semiconductor industry's first nonvolatile state saver - a novel device that saves the state of signals on demand and restores them to the correct state automatically on power up FRAM technology uniquely enables this capability due to its fast write time and virtually unlimited write endurance
This article was originally published on Electronicstalk on 1 Jul 2008 at 8.00am (UK)
Related stories
Nonvolatile memory records energy use
Plogg wireless energy management plugs use serial F-RAM devices for data logging.
F-RAM qualifies for automotive duties
The FM24CL64 is a popular choice for automotive radio applications with its fast writes and high endurance.
Ramtron's new family of low-power, nonvolatile state savers currently has two products: the FM1105, which operates at 5V, and the FM1106, which operates at 3V.
Both devices are available in a small SOT23 package.
Additional configurations are planned.
Further reading
Serial F-RAM remembers pressure transmitters
F-RAM device stores configurable parameters such as transmitter ranges, signal types, fluid properties etc, and retains the data when power is removed.
Ferroelectric RAM puts events on the record
Integrated event monitoring device continuously monitors state changes, stores them in FRAM and alerts the host system to the changes.
FRAM offers upgrade for Flash applications
High-density nonvolatile ferroelectric RAM features low power consumption and communicates via a high-speed serial peripheral interface.
The state saver is as simple to use as a D-type flip-flop.
It operates like conventional logic, but stores and retains the logic state in the absence of power, simplifying the design of system control functions.
The nonvolatile state saver is ideal for diverse applications such as switch interfaces, relay drivers, LED drivers, recording error flags, power down state detection, nonvolatile counters, tamper indicators, door open indicators, motor on/off control, DIP switch replacement, and jumper replacement, among others.
"The nonvolatile state saver is a fundamental building block that most engineers can use in their designs", says Ramtron Vice President Mike Alwais.
"The FM1105 and FM1106 are the first in a new line of unusual and novel products that use FRAM technology".
"nonvolatile storage applied to logic is a revolutionary concept, which has yielded a unique product that can remember stored output values without a battery".
"Any change in state is automatically recorded in a nonvolatile ferroelectric latch".
"This function is possible due to the fast writes and extremely high endurance of the underlying ferroelectric memory technology".
The low-power nonvolatile state saver provides continuous access to nonvolatile system settings without reading a memory or consuming dedicated processor I/O pins.
It enables storage of signals that may change frequently and without notice, and it allows the nonvolatile storage of system settings without the system overhead and extra pins of a serial memory.
The FM1105 operates from 4.5 to 5.5V at a low operating current of less than 15uA, while changing state continuously at 1kHz.
The FM1106 operates from 2.7 to 3.6V and boasts a low operating current of less than 5uA, while changing state continuously at 1kHz.
Both devices offer an unlimited number of state changes, can run up to 1MHz, and operate over the industrial temperature range (-40 to +85C).
The nonvolatile state saver is ideal for setting the correct state of a relay or switch.
During normal operation, the system sets the state saver to control the relay.
When power fails, the state saver remembers the last state and restores it automatically and immediately on power up.
This allows the relay to power up in the correct state - on or off as the application requires.
As a switch replacement, for example DIP switches or jumpers, the nonvolatile state saver allows software to alter switch settings and still have continuous access to the signals even on power up.
Many systems need to capture the indication that an error has occurred.
This may be a dangerous condition, a fault with equipment, or other status information.
The nonvolatile state saver is the easiest and fastest way to capture and preserve such an event during a power outage.
The system indicates the occurrence of an error state to the nonvolatile state saver.
This state will be stored on power down and restored automatically on power up.
The indication is continuously available and can be used as a control signal, unlike having the data stored in a memory.
Engineering samples of the FM1105 and FM1106 are available now.
The device is packaged in an 8-pin SOT23 that is RoHS-compliant.
Unit pricing starts at US $0.36 for quantities of 10,000 units.
• Ramtron International: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
