Product category:
Intellectual Property Cores
News Release from: RF Engines | Subject: vectis4000R2 core
Edited by the Electronicstalk Editorial
Team on 19 April 2002
Speedy complex FFT core fits on
million-gate FPGA
RF Engines (RFEL) has released details of its first product in its vectis family of multi-radix-architecture pipelined complex FFT cores.
RF Engines (RFEL) has released details of its first product in its vectis family of multi-radix-architecture pipelined complex FFT cores The vectis4000R2 core can continuously process data at a sample rate of up to 200Msample/s, which the company believes is one of the world's fastest FFT cores of its type
This article was originally published on Electronicstalk on 21 Sep 2001 at 8.00am (UK)
Related stories
PFT core processes video 20 times faster than DSP
RF Engines has created a new way of simultaneously processing digital signals across a wide spectrum in real time.
Filter is reconfigurable RF spectrum channeliser
RF Engines (RFEL) has developed a radical new patented filter bank design, called the Tuneable Pipelined Frequency Transform (TPFT).
Not only is the vectis family designed for high performance, but it is also designed to be optimised for minimal silicon use with this complex 4096-point version fitting in a single 1M gate Xilinx Virtex/E FPGA.
The cores are fully pipelined for maximum data throughput and complement RFEL's existing range of Pipelined Frequency Transform (PFT) products.
These IP cores are available for licence in net list or bit stream form and are intended for use in applications where processing speed is critical and optimum use of available silicon is required such as in high speed networking subsystems, VDSL communication systems and defence applications including electronic warfare, radar and signals intelligence systems design.
Further reading
Transform simplifies software-defined radio
This week at the International Signal Processing Conference RF Engines will formally release its Tuneable Pipelined Frequency Transform.
Polyphase DFT cores ready for FPGA use
RF Engines has added high-speed polyphase DFT (discrete Fourier transform) cores to its extensive range of digital signal processing technologies.
Models ease transition to fixed-point DSP
RF Engines has developed a new set of fast Fourier transform (FFT) and polyphase DFT bit true models for use with Matlab system design software.
"One of the most important points is that we have a fully implemented design working in silicon, rather than just vapourware.
We have used our expertise in providing high performance solutions for projects requiring complex front end, real time, wide and narrow band, flexible signal channelisation to create this ultra fast FFT core design", explained John Lillington, RFEL's CTO.
"The design uses a high degree of parallelism; the multipliers used are optimised for the target device allowing flexibility to use a mixture of embedded and logic built multipliers.
This flexibility is extremely important when trading off power, speed and adding other processing around the core on the same device.
We confidently expect to further refine further the upcoming cores in this family, achieving significantly faster performances (above 800MHz) with higher radix architectures in VirtexII devices".
The first product in the vectis range is the vectis4000R2 - a Radix 2 DIF (decimate in frequency) pipelined FFT that is optimised for Xilinx Virtex/E.
Significant performance increases are expected when implemented in VirtexII devices.
The FFT core is suitable for implementation in other high performance FPGAs that have sufficient internal RAM to support the designs, such as the Altera Stratix announced recently.
A downloadable whitepaper, which provides a more detailed specification, is available from the company's website.
The whole 4096-point FFT design fits into a single Xilinx Virtex1000E-ehq240, using 8478 slices (68% of the logic resource), and 58 out of the 96 block RAM available (thus leaving space for other processing.).
An optional bit reverser uses 32 block RAMs and a small amount of additional logic resource.
As the FFT core is an optimised pipelined architecture, unlike resource sharing single butterfly architectures, its physical size is dependent on the size of FFT to be performed.
Therefore the delivered core is of a set size as it is programmed with that specific n-point FFT configuration.
It may be possible to provide a core for say a 4096-point transform that can also select smaller transforms (eg 512, 256, 128 etc).
This provides better flexibility of operation but would not be an optimum use of silicon.
The vectis4000R2 core is delivered as an edif or ngo netlist with.ucf user constraints file.
Alternatively, it can be supplied as a bit stream if the FFT target device is fully defined and only holds the FFT core.
VHDL test benches are provided along with a VHDL simulation model.
Supporting documentation including data sheets and user guides are included.
Design support services for implementing the core into the target design, as well as debugging support, are available if required.
The throughput rate of this pipelined core is around eight times faster than the typical recycling architecture cores.
This higher throughput allows continuous processing without any of the input data being lost.
The vectis4000R2 core is available for immediate licensing.
Other variants of the core in terms of FFT length, input data width, bit growth per stage, twiddle width and blockRAM/distributed-memory split can be supplied under contract.
RFEL can optimise the core based on exact customer requirements.
The bit width (word length) of the data or twiddles is not fixed and, depending on the system requirements, can be tailored throughout the stages of the FFT to maintain the required dynamic range.
Bit width is a factor that affects silicon area, so should be given appropriate consideration.
Accuracy and precision are system design considerations that affect data bit width and twiddle width.
RFEL can offer system engineering advice to aid the selection of the optimal core configuration.
The core is supplied under an application licence with pricing based on an up front payment and royalty per use.
(This was Electronicstalk's Top Story on 18 April 2002).
• RF Engines: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
