Product category:
Analogue and Mixed Signal ICs
News Release from: Rohm Electronics | Subject: BA7615N
Edited by the Electronicstalk Editorial
Team on 04 March 2003
Integrated switcher cuts video chipcount
The BA7615N will reduce the component count, design complexity and power consumption in VCRs, televisions, multimedia equipment and other applications that require video signal switching.
A highly integrated multimedia IC from Rohm Electronics will reduce the component count, design complexity and power consumption in VCRs, televisions, multimedia equipment and other applications that require video signal switching Rohm's BA7615N video signal switcher integrates a 6dB amplifier, a 75ohm driver and a mute function into a single SIP-10 package that measures just 25.2 x 10.5 x 2.8mm
This article was originally published on Electronicstalk on 29 May 2008 at 8.00am (UK)
Related stories
LED drivers run straight from the mains
AC/DC modules integrate LED-driving control circuits, switching elements, isolation transformers and constant-current circuits into a single SIL package.
The IC also features four sync-tip clamp inputs, one output and three control terminals.
Combining a wide operating supply voltage of between 4.5 and 13V with excellent frequency characteristics (typically 0dB at 10MHz), the new video switcher offers a typical maximum output level of 3.5V peak-peak.
The IC also offers low typical channel-to-channel crosstalk of just 65dB at a frequency of 4.43MHz.
Maximum power dissipation of the new device is rated at just 850mW, while the operating temperature range is from -25 to +75C.
• Rohm Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
