Product category:
Touchscreens and Touch Sensors
News Release from: Saelig Company | Subject: QT1106
Edited by the Electronicstalk Editorial
Team on 27 October 2006
Touch sensor combines control functions
Novel touch-sensing and control IC combines the functionality of a touch slider or wheel with seven additional keys.
The QT1106 is a novel touch-sensing and control IC providing the functionality of a touch slider or wheel with seven additional keys Constructing a highly reliable wheel or slider uses the QT1106 with a simple, inexpensive sensing element between three connection points
This article was originally published on Electronicstalk on 16 Nov 2005 at 8.00am (UK)
Related stories
Touch chip senses through 100mm of glass
The QT160 IC is a self-contained digital QTouch chip capable of six channels of proximity or touch sensing.
Capacitive pot cuts interface costs
The QT511 is a new enhanced version of the Quantum Research QWheel chip.
The device detects a single rapid touch anywhere along the sense elements, or tracks a finger moving along the wheel or slider surface in real-time.
In both instances, absolute position is detected.
The QT1106 can also interface with seven additional touch keys, which can be independently tuned for sensitivity, allowing the QT1106 to be the basis of a complete user interface for any application in which a mechanical wheel, slider or switch would normally be used.
Further reading
USB-based data loggers boast top precision
With up to 24bit resolution and 0.1% accuracy, new data loggers offer the ultimate in resolution and accuracy and simply plug into the USB port of a standard Windows based PC.
Dual-core MCU is made for industrial control
A novel industrial SoC microcontroller contains two ARM 946E cores, two CAN channels, two 10/100Mbit/s Ethernet MACs and a versatile motion control logic capability.
But the QT1106's "QT-touch" technology costs less to implement, allows greater design freedom and cannot wear-out, thus offering improved reliability.
Target applications include mobile phones, remote controls, small kitchen appliances, home audio, portable media players (including MP3 players) and lighting controls.
The QT1106's sensing technology allows electrodes to be made from any conductive material, which projects sense fields through any dielectric- most commonly plastic or glass.
An approaching finger causes a change in the sense field, registering a touch event.
Unlike traditional capacitive touch sensors, QT sensors feature automatic self-calibration on power-up.
This eliminates long-term drift problems due to build up of contaminants on the touch surface or changing environmental conditions.
A flexible low power mode enables system designers to optimise the tradeoff between response time and power consumption.
The QT1106 uses spread-spectrum burst technology to provide better than 20V/m noise rejection and minimise EMI.
The QT1106 has an SPI interface and features a sync mode to enable synchronisation with other similar parts, or with an external source, to suppress interference.
Patented adjacent key suppression (AKS) prevents multiple keys responding to a single touch.
AKS works by comparing the relative signal strength from each key within a group and suppresses touch detections from keys showing a weaker signal change than the dominant one.
Close spacing of keys can therefore be used, without introducing touch errors.
Designed in UK by European capacitive-sensing specialists Quantum Research Group, the QT1106 comes in an RoHS-compliant, 32-QFN package and operates from a single 2.8-5V supply.
The QT1106 is available from stock from Saelig at less than $1.00 (100,000-off).
• Saelig Company: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
