Product category:
Test Accessories
News Release from: Schaffner | Subject: BHA 9118
Edited by the Electronicstalk Editorial
Team on 24 July 2002
Horn antenna offers 18GHz capability
The BHA 9118 double-ridged horn antenna is suitable for a wide range of applications, particularly RF and EMC measurements to MIL, SAE, IEEE, IEC and FCC standards.
The BHA 9118 double-ridged horn antenna is suitable for a wide range of applications, particularly RF and EMC measurements to MIL, SAE, IEEE, IEC and FCC standards The Schaffner BHA 9118 is a 1 to 18GHz linearly polarised broadband unit
This article was originally published on Electronicstalk on 16 May 2008 at 8.00am (UK)
Related stories
Harmonic filters raise power system efficiency
Load-applied passive harmonic filters represent the ideal solution for three-phase power electronics with six-pulse rectifier front ends.
It is capable of 250V/m, at 1m.
The design is rugged and corrosion-resistant, and can be used to receive and transmit.
A precision N-type connector is used to provide low VSWR and high power handling capability.
Each antenna is individually calibrated, following ANSI 063.5 traceable to national standards.
The antenna is supplied with a calibration certificate that contains the measured antenna factor data certifying precise antenna performance.
A gain plot is also supplied, traceable to national standards.
Further calibrations can be carried out at additional cost.
Protective strips protect the edges of the two glass-fibre sides of the unit from accidental damage.
A mounting bracket is incorporated with a standard camera thread to enable easy mounting on most tripods.
This also allows easy adjustment for vertical, horizontal and 45-degree polarisation.
A case is provided to ensure safe storage and transit. Request a free brochure from Schaffner ...
• Schaffner: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
