Inlet module is protected against EMI and ingress
A
Schurter product story
Edited by the Electronicstalk editorial team
Mar 15, 2007
Power entry module is the first to offer an alternative to makeshift accessories often used to prevent particles or liquids from entering into the appliance.
Schurter reckons its new series 5707 power entry module is the first to offer an alternative to makeshift accessories often used to prevent particles or liquids from entering into the appliance.
The new power entry module is resistant to dirt, dust and other fine particles as well as sprays, splashes and jets of nonaggressive liquids.
It is ideal for use in electronic equipment exposed to leaks, drips and spills as well as equipment subject to routine cleaning or disinfecting.
The inlet portion of the 5707 is according to IEC60320-1, style C14 or C18.
It is combined with a one- or two-pole fuseholder and a standard or medical EMC filter rated up to 8A at 250V AC.
The complete unit is rated IP65 with seal protection at the panel opening, around the fuseholders and between the inlet and connector pins.
The seal at the panel opening is achieved with a rubber lining, which is fixed into a groove around the metal flange.
Front or rear mount versions are available.
Special screws guarantee the sealing at the mounting holes.
The fuseholders are independent of each other and accept 5 x 20mm fuses.
Screw caps with O-rings are used to provide a seal between the cap and holder.
A tool is required to remove the cap from the holder to replace the fuse, which is required for medical equipment.
The 5707 offers prewired electrical connections, using 6.3 x 0.8 quick-connect terminals.
The series is approved according to ENEC, UL and CSA.
Versions for protection class I or II are available as well as a version with special class I capacitors for increased voltage withstand.
The module is according to medical standards IEC/UL60601-1 and is ideally suited for use in medical applications such as diagnostic, dialysis and infusion devices as well as commercial appliances such as drink dispensing equipment.
Not what you're looking for? Search the site.
Contact Schurter
Tel +41 41 369 3111
Request information
Other Schurter stories
-
Filtered inlets available in Eco design
Schurter's IEC C14 inlet with EMI filter, series 5120 Eco is designed to meet the increasing demands of IT, medical and industrial appliances and is now also available as snap-in mounting version. -
Filtered inlet features combined capacitors
Schurter is claiming a breakthrough in simple and universal electromagnetic compatibility for high frequency applications using X2Y filter technology. -
Fuse obtains space approval
The MGA-S fuse meets the standards of the aerospace industry, which requires hermetically encapsulated and rugged designs. -
Circuit breakers offer colour options
The rocker-actuating switch can be supplied either with or without illumination, in several colours and with various legends or customer-specific symbols. -
EMI filters provide mounting options
The Eco design provides cost savings and maximum performance in a lightweight and environmentally friendly compact package.
Categories
- Active Components (11,917)
- Passive Components (2,949)
- Design and Development (9,394)
- Enclosures and Panel Products (3,246)
- Interconnection (2,841)
- Electronics Manufacturing, Production, Packaging (3,055)
- Industry News (1,898)
- Optoelectronics (1,616)
- Power Supplies (2,297)
- Subassemblies (4,551)
- Test and Measurement (4,956)
