Product category:
Sensors and Data Acquisition
News Release from: Sensopart UK | Subject: SmartPlug
Edited by the Electronicstalk Editorial
Team on 26 February 2001
Intelligent connectors condition sensors
SensoPart claims its new SmartPlug enables users to realise time functions, counting, polarity conversion and speed control, with a minimum effort of installation.
SensoPart claims its new SmartPlug enables users to realise time functions, counting, polarity conversion and speed control, with a minimum effort of installation For this purpose, the appropriate SmartPlug is simply connected between M12 sensor cable and sensor
This article was originally published on Electronicstalk on 22 Feb 2001 at 8.00am (UK)
Related stories
Extra range for colour sensor
The new F50 colour sensor from Sensopart combines a white LED with a unique patented optical system.
The complete electronics of the SmartPlug is located in the small connector housing which measures only 60 x 20mm.
Maximum output current of the SmartPlug is 400mA, so that it can be used as switching amplifier as well as its actual function.
SmartPlugs are available as counters with a maximum input frequency of 10 kHz and a counting range of 1 to 65535, and as timers or speed controllers with an adjustable time range of 1 to 65535ms and a maximum input frequency of 10kHz as well.
SmartPlugs are also available for converting PNP signals into NPN signals or vice versa with the addition of selecting normally open or normally closed operation.
• Sensopart UK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
