Product category:
Power Supply ICs and Controllers
News Release from: International Rectifier | Subject: iMotion for washers
Edited by the Electronicstalk Editorial
Team on 31 May 2006
Power chipset to clean up on white goods
control
International Rectifier has introduced a sensorless control platform for direct-drive permanent magnet synchronous motor washing machines.
International Rectifier has introduced a sensorless control platform for direct-drive permanent magnet synchronous motor (PMSM) washing machines The new platform, featuring an embedded field oriented control (FOC) algorithm for high-dynamic torque control, improves washing cycles consuming less hot water to save up to 70% of energy usage
This article was originally published on Electronicstalk on 15 Feb 2001 at 8.00am (UK)
Related stories
1kV rad-hard power MOSFET saves satellite space
International Rectifier has introduced the world's first 1000V radiation-hardened power MOSFET.
MOSFETs improve 12V-input converter efficiency
Two new 20V HEXFET power MOSFET families from International Rectifier are designed to increase efficiency by up to 4% in 12V-input DC/DC convertors.
This latest addition to the iMotion family features a mixed-signal controller and companion intelligent power modules as well as algorithms, development software, and design tools.
Combined in one platform, iMotion for washers simplifies design of variable-speed motor-control in both horizontal and vertical axis washing machines, accelerating time to market and reducing overall system cost.
"The application of direct-drive PMS motors in washing machines improves system dynamics and reduces overall system cost due to a simpler mechanical structure".
Further reading
MOSFETs improve power density on both sides
New from International Rectifier are two TO-220-packaged HEXFET power MOSFETs that maximise power density and performance in primary- and secondary-side DC/DC convertor circuits.
Rad-hard MOSFETs protect and survive
With high radiation hardness and unparalleled single event effect (SEE) immunity, International Rectifier's new R5 MOSFETs are well suited for systems that must survive penetrating gamma rays.
Reference design simplifies high-efficiency PSUs
International Rectifier has released a reference design for its recently introduced IR1176 application-specific synchronous rectification IC (SRIC).
"Typically, Hall effect sensors are deployed to provide rotor position information necessary for control of these motors, adding cost and complexity to the motor design".
"The iMotion platform enables sensorless sinusoidal current control, completely eliminating Hall Effect sensors and delivering smooth torque over an extended speed range".
"The bottom line is that the iMotion approach should accelerate deployment of energy-efficient motors, helping us to save a great deal of electricity", said David Tam, Vice President of International Rectifier's Energy - Saving Products Segment.
The high-performance IRMCF341 washer control IC integrates all the control and analogue interface functions required for sensorless speed control of PMS motors using DC link current measurements.
The analogue functions on the IC include differential amplifier, dual sample and hold circuits and a 12bit A/D convertor to sample the low-voltage signal across the DC link shunt.
The digital control IC features IR's patented Motion Control Engine (MCE) that eliminates software coding from the motion control algorithm development process.
A co-integrated 60MIPS, 8bit, 8051 microcontroller enables application layer software development, operating almost independently of the MCE and does not compete for system resources such as interrupts or internal registers.
This streamlines application software debugging since the MCE can be treated very much like hardware peripheral with a set of input and output registers.
The embedded analogue signal engine (ASE) integrates all the signal conditioning and conversion circuits required for single current shunt, sensorless control of a PMS motor.
The IRMCF341 control IC is available in a 64-pin QFP package with all the required analogue inputs and PWM outputs to control the washing machine motor.
The companion IRAMS06UP60B and IRAMS10UP60B inverter power modules feature an advanced high-voltage gate drive IC for three-phase inverter control.
The modules include the DC link shunt used for both motor current measurement and power module protection.
Built-in overtemperature/overcurrent protection, along with short-circuit rated IGBTs, an integrated under-voltage lockout function, and built-in temperature monitor provide a high level of protection and fail-safe operation.
The platform includes the IRMCS3041 reference design, in addition to web-based software tools, to customise application requirements.
The embedded field oriented control (FOC) algorithm optimises the output torque from interior permanent magnet motors and maximises bus voltage utilisation in the high-speed field weakening mode.
Tools include communications software running on the 8051 microcontroller that gives the PC-based MCEDesigner software access to the control parameters and system variables in the shared memory.
This allows modification of the controller set points and control loop gains and other constants without needing to modify or compile software.
MCEDesigner tools generate wash-cycle profiles and plot motor speed and current, accelerating rapid evaluation of direct-drive motor performance with real washing loads.
• International Rectifier: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
