Product category:
Compliance Engineering
News Release from: SPS Electronic UK | Subject: HA 2200 series
Edited by the Electronicstalk Editorial
Team on 16 September 2002
High-voltage flash tester aids safety
compliance
The HA 2200 series of high-voltage flash testers is supplied in a 19in/4HU case and equipped with a fully electronic high-voltage generator.
The HA 2200 series of high-voltage flash testers is supplied in a 19in/4HU case and equipped with a fully electronic high-voltage generator Modern electronics gives a high-voltage source of up to 5000V AC, with a capacity of 500VA at 230V 50 Hz or 115V 60Hz
This article was originally published on Electronicstalk on 23 May 2002 at 8.00am (UK)
Related stories
Lighting tester provides the whole in one
A novel all-in-one lighting tester combines DC insulation resistance testing with functional and high-voltage flash testing to cover regulatory, safety and quality requirements in one package.
Safety and function in one cut test times
The KT 3301E is a combined safety and functional tester designed for production testing in accordance with BS EN60335, 60204, 61010 and many other standards.
The option of DC voltage up to 6000V (electronic source generated by 400Hz leading to very low values of ripple) can also be supplied.
The high-voltage output is potential free and with additional safety devices fitted, the tester meets the EN50191 safety standard (Erection and operation of electrical test equipment).
The testers can be used with a test fixture, in a test system or with test probes, one of which contains a switch to apply the test, so there is no need for a footswitch.
The technical specification for this range of flash testers will meet most relevant standards (BS, EN, IEC, UL, VDE etc.).
The HA2200 range comes equipped with programmable ramp function, 100 test programs, visual and audible alarm, dwell timer (0.1 - 99.9s), burn-out function, 4 x 20 LCD, internal clock/calendar, RS232 interface (printer/remote control) and a 24V DC control interface for OEM systems applications.
The RS232 interface can be used with commercially supplied software products such as LabView.
Options include: DC insulation resistance measurement; arc evaluation; four-wire measurement; active current measurement; Windows software for setting up programs and logging test results; an IEEE interface; rear-panel output connections; a status beacon (required if complying with EN50191); and an upgrade to 7500V AC/DC.
• SPS Electronic UK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
