Connectors come in multiple configurations

The PCB mount series' cantilever contacts offer a reliable connection in a wide array of high-reliability, or high-cycle mother-daughterboard applications

Sullins Electronics has released a cantilever edgecard connector series engineered to provide high-performance, low cost connections on 2.54 or 3.96mm centreline boards.

Designed to mate with the plated fingers of a 1.5748mm daughterboard, parts may be ordered rated to withstand +125C, +150C, or +175C continual heat.

These double-row connectors are available with either 9.398 or 10.16mm wide insulators and are supplied in right angle, card extender and straight lead configurations, as well as in a large range of sizes to afford maximum design flexibility and manufacturing efficiencies.

Moreover, they boast superior electrical and physical characteristics and are interchangeable with Sullins' devices, without the need to replace motherboards or daughterboards.

The PCB mount series' cantilever contacts offer a reliable connection in a wide array of high-reliability, or high-cycle mother-daughterboard applications requiring the connection of one printed circuit board (motherboard) to 1.5748mm daughterboards .

They are suitable for use in communications systems, medical equipment, instrumentation and automotive R and D.

The high-temperature parts may be confidently specified for such applications as test and burn-in ovens.

The UL94-0 rated devices feature selective gold plating or overall gold and a current rating of 3A per pin.

They are available in 6/12 through 70/140 dual positions on 2.54mm centreline spacing and with 6/12 through 43/86 dual positions on 3.9624mm centreline spacing.

Supplied with a choice of standard thermoplastic polyester, PA9T, beryllium copper, or phosphor bronze contacts, the series features an insulation resistance of 5000Mohm minimum and a di-electric withstanding voltage of 600V DC (on 2.54mm centrelines) and 1800V DC (on 3.9624mm centrelines).

Back to top