Latest news on Electronicstalk categorised by supplier
SynQor Europe
Address:
Fuggerstrasse 9A
D-92224 Amberg
Germany
Telephone: (Germany) +49 9621 784 322
http://www.synqor.com
Our RSS feed for news from SynQor Europe
Request to receive our free email newsletter each week
Listing of all 49 news releases from SynQor Europe:
Telecomms convertor delivers top power rating
Open-frame DC/DC convertor boasts the highest output power currently available in the marketplace for a half-brick device. Brochure available
News from SynQor Europe (14 January 2008)
Efficient AC/DC power supplies suit medical use
The AcuQor family operates over a universal input range of 85-264V RMS and 47-63Hz, making it suitable for worldwide deployment. Brochure available
News from SynQor Europe ( 9 November 2007)
DC/DC convertors suit industrial applications
The IQ24-EGA series is available either as an open frame device, or as a fully encased device with an attached baseplate for cold-plate or heat-sink mounting in harsh environments. Brochure available
News from SynQor Europe (16 October 2007)
Quarter brick convertor packs up to 120W
High-power-density convertor is suitable for any application where a 24V rail is needed in a 48V environment. Brochure available
News from SynQor Europe ( 4 October 2007)
Convertor delivers 30A output
The current share feature included in the NQ15W50SGA30 enables multiple devices to be connected in parallel to provide higher levels of load current. Brochure available
News from SynQor Europe (17 September 2007)
DC/DC convertor handles tough conditions
The PQ60240EGL03 is capable of withstanding transients on the input to 100V for 100ms, and has a basic isolation level from input to output of 2000V DC. Brochure available
News from SynQor Europe (30 August 2007)
DC/DC convertors suit railway applications
SynQor's IQ36xxxQTA family of Isolated quarter-brick DC/DC convertors offer a 4:1 input voltage range of 18-75V. Brochure available
News from SynQor Europe (22 August 2007)
Quarter bricks have flexible single outputs
Quarter-brick isolated DC/DC convertors for industrial and medical applications accept 18-36V inputs, and are rated at 120W or 40A. Brochure available
News from SynQor Europe ( 2 August 2007)
Power interface module aids AdvancedTCA compliance
Power interface module offers designers the smallest available overall power solution for ATCA carrier card designs. Brochure available
News from SynQor Europe (13 July 2007)
DC/DC convertors meet rail industry standards
72V-input quarter-brick DC/DC convertors expand options for railway and transportation applications. Brochure available
News from SynQor Europe ( 5 July 2007)
Distributor is chosen for French diversification
SynQor has signed a nonexclusive distribution contract with Trium Power of Dourdan France. Brochure available
News from SynQor Europe (11 June 2007)
Quarter bricks have power for transport
110V-input quarter-brick DC/DC convertors are designed for railway and transportation applications. Brochure available
News from SynQor Europe ( 1 June 2007)
Bricks to power cellular basestations
Isolated full brick DC/DC convertors combine the power density, efficiency and reliability required for RF power amplifier applications in cellular radio infrastructure equipment. Brochure available
News from SynQor Europe (18 May 2007)
Quarter-brick DC/DC convertors run from 12/24V bus
The IQ18xxxQTAxx quarter-brick DC/DC convertors are available as open frame units for convection-cooled applications. Brochure available
News from SynQor Europe ( 7 May 2007)
12V DC/DC convertors for industrial applications
A range of 12V DC/DC convertors come in quarter-brick sizes and are intended for industrial applications. Brochure available
News from SynQor Europe (23 April 2007)
More options in sixteenth-brick outline
SynQor now offers a range of sixteenth brick devices that cover output voltages of 1.2, 1.8, 2.5, 3.3 and 5V, up to a maximum of 66W total output power. Brochure available
News from SynQor Europe (30 March 2007)
Wide-range convertors for flexible power systems
Surface-mount point-of-load convertors have ultrawide input and output configurations to address the growing demands of intermediate bus architecture applications. Brochure available
News from SynQor Europe ( 2 February 2007)
60W convertors shrink to sixteenth bricks
SynQor has extended its range of sixteenth-brick DC/DC convertors with isolated outputs of 5V/12A and 1.8V/25A, offering up to 60W of usable power in a 755mm2 footprint. Brochure available
News from SynQor Europe (24 January 2007)
Brochure features advanced DC/DC convertors
SynQor has released a new brochure featuring its most advanced DC/DC convertor product lines including the most recent Advanced TCA interface module and high power convertors. Brochure available
News from SynQor Europe (23 August 2006)
Sixteenth brick produces more current
The PQ60033SGL20 is the first in a fully 6/6 RoHS compliant family of sixteenth brick DC/DC convertors. Brochure available
News from SynQor Europe (15 June 2006)
Convertor answers ATCA carrier card demands
Half brick convertor puts power over LANs
Half brick boasts 3% better efficiency
Eighth brick bus convertor is highly efficient
Quarter bricks power up wireless power amps
Point of load convertor shrinks to tiny package
Eighth-brick convertor takes on quarter-brick role
Shanghai is fifth Asian location for SynQor
Convertors are dedicated to wireless duties
Quarter bricks aim for wireless applications
More options for quarter-brick convertors
Half-brick convertor powers up Ethernet
Quarter brick range expands for telecomms
Parmese takes charge of finance
Half bricks aim for high-current applications
Quarter bricks house two independent convertors
Convertors are cool for wireless basestations
Nonisolated SIP convertors boost efficiency
Injunction over "flawed test results"
Landino leads technical services group
Repping deal extends to Central Europe
Convertor provides loads of current down to 1.2V
Investment allows for expansion at SynQor
No heatsink for low-voltage quarter bricks
Convertor produces 40A from a quarter brick
SynQor strengthens team in Southern Europe
60W dual-output convertor needs no heatsink
