DC/DC convertors suit industrial applications

The IQ24-EGA series is available either as an open frame device, or as a fully encased device with an attached baseplate for cold-plate or heat-sink mounting in harsh environments.

SynQor today has released isolated DC/DC convertors for the industrial marketplace as part of the expansion of its InQor product range.

The IQ24-EGA series of eighth-brick devices operate over an input voltage range of 18-36V and provide up to 25A, or 75W of output power.

The available output configurations include 1.8V/25A; 3.3V/20A; 5V/15A; 7V/10A; 12V/6A; 15V/5A and 24V/3A.

Applications include industrial process control systems and industrial computing.

The IQ24-EGA series is available either as an open frame device, or as a fully encased device with an attached baseplate for cold-plate or heat-sink mounting in harsh environments.

It measures 58.4 x 22.9 x 10.41mm in open-frame format, and offers high power density at efficiency levels of up to 90%.

The high efficiency and optimum layout of the synchronous rectifier-based topology leads to maximum output current availability with minimal derating.

In many cases, the eighth-brick IQ24-EGA will be able to replace traditional quarter-brick packages from competitors used in existing designs.

Fixed switching frequency operation offers predictable EMI performance.

The IQ24-EGA series is capable of withstanding transients on the input to 50V for 100ms and has a basic isolation level from input to output of 2000V DC.

Control and protection features include remote sense, a wide output voltage trim range of -10% to +10%, input under-voltage lockout, output OVP, current limit, short circuit protection, active back bias limiting and thermal shutdown.

The operating temperature range is -40 to +100C.

Back to top