Product category:
Design and Development Software
News Release from: Synopsys | Subject: Galaxy
Edited by the Electronicstalk Editorial
Team on 25 October 2007
IC test generator takes power criteria
onboard
The TetraMax automatic test pattern generation now creates tests reflecting designers' power budgets.
Synopsys has extended low power management capabilities of its Galaxy test solution to significantly reduce the time and effort needed to generate high quality, power aware manufacturing tests for ICs The TetraMax automatic test pattern generation (ATPG) solution now creates tests reflecting designers' power budgets, and the DFT Max scan compression product further automates integration of design for test (DFT) structures in designs that deploy advanced low power management techniques
This article was originally published on Electronicstalk on 5 Feb 2003 at 8.00am (UK)
Related stories
Complete platform covers advanced IC design
The Galaxy Design Platform is an open, integrated design implementation platform with best-in-class tools, to enable advanced IC design.
Test solution aids core-based design development
Synopsys has added a comprehensive test automation solution for core-based designs to its DFT Compiler, a key component of the Galaxy design platform.
Previously, manufacturing tests were not power aware, and designers used a time consuming and error prone manual process to integrate on-chip DFT resources into low power design flows.
The Galaxy test solution now offers enhanced automation of power management to accelerate DFT implementation for low power flows and automatically creates high quality, power aware manufacturing tests.
Scan testing typically increases transistor switching activity inside ICs by many times their peak functional mode levels, leading to excessive power consumption.
Further reading
Analyser speeds to faster timing signoff
The latest release of PrimeTime - the timing backbone in Synopsys' Galaxy design platform - has set a new standard for performance in static timing analysis and signoff of multi-million-gate designs.
Tools form basis of TSMC Reference Flow
The Galaxy Design Platform and other Synopsys tools have been integrated into TSMC's advanced Reference Flow 4.0.
Design platform takes on signal integrity tool
Galaxy SI is a new and complete signal integrity solution within the Galaxy Design Platform that addresses crosstalk delay, noise (glitch), IR (voltage) drop and electromigration.
Too much power consumption during test can lead to unpredictable test results, including the failure of fully functional devices at the tester, and unnecessary yield loss.
Ad hoc power reduction techniques for test, however, require considerable engineering effort to implement seamlessly with scan compression, used for reducing test data volume.
New functionality in the TetraMax product limits power consumption during test by automatically reducing switching activity to levels consistent with normal operation, based on designer specified power budgets.
This is achieved without compromising the cost savings advantage of DFT Max scan compression and test coverage.
Automation to manage power consumption also facilitates testing of subtle delay defects in nanometre devices.
"Synopsys' TetraMax small delay defect pattern generation capability detects timing problems associated with paths having very small timing margins", says Dr Tom Williams, a Synopsys Fellow and industry recognised test expert.
"Because excessive power consumption can affect the delays of such paths, automation to manage it is now included in TetraMax as part of Synopsys' comprehensive ATPG solution for achieving ultra high test quality".
Besides adding capabilities to limit power consumption during test, Synopsys has enhanced DFT Max to significantly simplify the implementation of DFT in designs with multiple voltage domains.
DFT Max power optimisation minimises the number of scan chain connections that cross voltage domains, lowering the area impact of DFT by reducing the number of required level shifters and power isolation cells.
Power intent affecting both scan domains and power domains, and specified in the Accellera standard Unified Power Format (UPF), is now preserved throughout the Galaxy platform flow, from synthesis through physical implementation and sign off.
"Designers benefit from the ability to quickly and easily generate high quality, low cost manufacturing tests while preserving their power intent", says Antun Domic, Senior Vice President and General Manager, Synopsys implementation group.
"Automation of low power management in the Galaxy platform is consistent with Synopsys' commitment to provide our customers a comprehensive design platform that makes possible concurrent optimisation of timing, signal integrity, area, power and test".
• Synopsys: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
