Product category:
Design and Development Software
News Release from: Altium | Subject: Altium Designer
Edited by the Electronicstalk Editorial
Team on 16 October 2006
Design environment supports crossover
PLDs
Altium Designer has been enhanced to include full support for Lattice's MachXO family of crossover programmable logic devices (PLDs).
Altium Designer has been enhanced to include full support for Lattice's MachXO family of crossover programmable logic devices (PLDs) This move allows engineers to rapidly construct application hardware targeted to the popular, low cost, highly capable MachXO devices using the full power of Altium Designer's unified design environment
This article was originally published on Electronicstalk on 16 May 2005 at 8.00am (UK)
Related stories
Software unifies electronic product development
Altium has unified its recently released DXP 2004-based products under the Altium Designer name.
Service pack upgrades design software
Available as a free download to existing licensed Altium Designer Nexar, Protel, CircuitStudio and CAMtastic customers, SP4 includes over 100 new features and enhancements.
The addition of the Lattice MachXO family extends the range of Lattice devices already included with Altium Designer and joins an ever increasing array of devices supported by the system, reinforcing Altium's commitment to offering FPGA device- and vendor-independent solutions.
This means designers can make use of an extensive range of devices using the same programmable design platform, eliminating the need to purchase additional software or specific device support modules.
This also gives designers the freedom to make implementation decisions, such as final device selection, much later in the design cycle when design requirements are more fully understood.
Further reading
Design suite extends to low-cost Lattice FPGAs
Altium is supporting Lattice Semiconductor's LatticeEC and LatticeECP FPGA devices as part of its recently released Service Pack 4 (SP4) for Altium Designer.
ESL by any other name
The latest hot topic in the chip design world recently has been electronic system level design, says Rob Irwin, Product Marketing Manager at Altium.
Suite caters for denser boards and faster signals
Altium Designer 6.0 is the latest version of the groundbreaking unified electronic product development system.
"The unique MachXO architecture combines the fast programmability of SRAM-based FPGA technology with the security of integrated flash configuration to offer a level of performance beyond the capabilities of traditional CPLDs, with the flexibility of an FPGA", stated Tim Schnettler, Lattice Director Design Tools Marketing.
"Altium Designer's unified architecture combined with the unique features of MachXO opens up exciting possibilities for our customers, such as additional design flexibility and faster time to market".
Altium Designer is the first design system to bring together hardware, software and programmable hardware design within a single, unified environment.
It includes an extensive set of ready-to-use "soft" components that can be used to target a wide range of programmable devices, including the MachXO.
Developers can even implement small processors, such as Altium Designer's TSK165 soft-core RISC processor, within MachXO devices.
Altium Designer also includes a range of "virtual instruments" that can be added to circuitry at the schematic level and implemented inside the target device on a suitable development board.
These instruments connect to soft front panels within the system to allow an interactive approach to be taken to programmable logic design, minimising the need for extensive and time-consuming HDL simulation.
"MachXO bridges the gap between CPLDs and FPGAs, making them extremely useful devices", says Nick Martin, founder and CEO of Altium.
"The versatility of these devices complements the unified nature of the Altium Designer environment and the introduction of support for the MachXO family brings even greater flexibility to engineers developing systems with Altium Designer".
Support for the Lattice MachXO family of crossover programmable logic devices (PLDs) is now available in the latest version of Altium Designer - Altium Designer 6.5.
Altium Designer 6.5 is available for purchase through Altium's sales and support centres worldwide.
• Altium: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
