Product category:
Electronics Manufacturing Materials and Consumables
News Release from: Tecan | Subject: Photochemical machining
Edited by the Electronicstalk Editorial
Team on 29 November 2002
Photochemical machining produces robust
MEMS
Designers and OEMs worldwide are set to benefit from the significant technological advancements recently achieved by photochemical machining specialist Tecan.
Designers and OEMs worldwide are set to benefit from the significant technological advancements recently achieved by photochemical machining specialist Tecan The company has breached traditional manufacturing obstacles to deliver low-cost micro metal parts, and larger parts with ultra-fine features, for a vast new applications arena covering electronics, optical, medical and aerospace
This article was originally published on Electronicstalk on 24 Oct 2000 at 8.00am (UK)
Related stories
Can-on-board solder migration problems solved
Tecan Components has solved a range of problems associated with automated soldering of RFI screening cans/fences onto PCBs with the introduction of the 'Plimsoll line and lattice bridging stencils'.
Labyrinth RFI screening can brings RFI benefits
A labyrinth RFI screening can is an effective one-part board-level alternative for PCB designs which would otherwise require solid metal enclosures or multiple screening cans.
The inherent advantages of the technology are expected to be exploited by a wide range of industries, for the demanding next-generation micro applications, where products will be made significantly smaller and finer, repeatedly, at lower cost and with fewer production processes.
Typical micro-applications include sensors, actuators, hearing aids, medical devices, optical instruments, micro-lenses, meshes, masks, displays and micro-fluidic devices.
Micro structures can be manufactured to extremely small scale, with features, such as apertures, fluid channels or raised lands, down to one or two microns - with tolerances at submicron levels.
Further reading
Mini rework stencils save time and money
Mini stencils from Tecan Stencils ensure accurate repeatable paste deposits are produced when replacing components such as QFPs, PLCCs and BGAs during PCB rework operations.
Prototype micro metal parts in five days
A five-day prototype service has been launched by Tecan, offering design engineers cost-effective small sheet metal parts for a vast array of applications.
Tighter tolerances for nickel evaporation masks
Tecan has developed a range of high-performance nickel evaporation masks, for use in a range of selective vacuum chamber deposition processes, such as gold and silver plating on silicon.
They will also be employed in microelctromechanical systems (MEMS) and micro optical electromechanical structures (MOEMS).
Similarly, the company can produce larger parts, up to 300 x 300mm, with equally fine resolutions.
Recently opened by His Royal Highness The Prince of Wales, the company's dedicated new GBP 2 million, 800m2 facility houses a state-of-the-art Class 1000 clean room, within which are a number of Class 100 areas.
These highly clean areas ensure the provision of particle-free environments where components with submicron features can be repeatedly and consistently fabricated.
The company has developed world-leading photo-electroforming production and in-house plating techniques to make such cost-effective accuracy possible.
Previously in the manufacturing world, MEMS have predominantly been manufactured in silicon, using expensive technology from the semiconductor industry.
Tecan currently produces such parts in nickel, at significantly lower cost, and has plans to move into other pure conductive materials such as copper and gold in the near future.
Such parts offer significant advantages over brittle and expensive silicon options, such as mechanical strength, electrical conductivity, corrosion resistance and other unique benefits.
The company describes the new technology as the hybrid application based on three established manufacturing technologies - silicon semiconductor, high-volume audio CD, and micro-embossing tools such as those used in micro-lens array and hologram manufacture.
Ongoing market feedback from existing customer joint ventures combined with 30 year's experience in photochemical machining and photo-electroforming were also crucial elements in the development of the new processes.
"One of the greatest benefits to our customers, is an increasing appreciation of photo-electroforming and the opportunities it offers their designers as they liase with our own", said Noel Cherowbrier, Tecan's Sales and Marketing Director.
"As these relationships develop, designers increasingly realise that we can make micro-metal components with more exacting designs and tighter tolerances than they ever realised were achievable.
Unique and extremely sophisticated three-dimensional parts are now being conceived as OEM engineers and designers explore the wider technology envelope now available to them - through the traditional x-y axis, and now beyond - through exploitation of the z axis too".
Exceptional tolerance and accuracy are assured, across the maximum surface area of 300 x 300mmm, far greater than most existing silicon capabilities.
Raised areas can be produced with a maximum aspect ratio of 5:1 and potentially greater.
Tracks and channels can be fabricated as narrow as 2um wide, 4um pitch, with smooth walls and submicron tolerances.
Surface smoothness is also exceptionally accurate, being subwavelength, at 600nm across surface (lambda/4).
• Tecan: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
