Product category:
Electronics Manufacturing Services
News Release from: Tecan | Subject: Custom-made optical encoder discs
Edited by the Electronicstalk Editorial
Team on 27 July 2004
Optical encoder discs made to (exact)
order
Optical encoder disc designers and specifiers requiring cost-effective, accurate and durable solutions, now have access to what is believed to be the most versatile manufacturing facility in Europe.
Optical encoder disc designers and specifiers requiring cost-effective, accurate and durable solutions, now have access to what is believed to be the most versatile manufacturing facility in Europe Custom-designed optical encoder discs are routinely manufactured by Tecan in prototype through to volume quantities for a wide array of highly-accurate motion control, positioning and measurement applications
This article was originally published on Electronicstalk on 24 Oct 2000 at 8.00am (UK)
Related stories
Can-on-board solder migration problems solved
Tecan Components has solved a range of problems associated with automated soldering of RFI screening cans/fences onto PCBs with the introduction of the 'Plimsoll line and lattice bridging stencils'.
Labyrinth RFI screening can brings RFI benefits
A labyrinth RFI screening can is an effective one-part board-level alternative for PCB designs which would otherwise require solid metal enclosures or multiple screening cans.
Fundamentally, says the company, the degree of control required by the application determines the encoder disc's slot count and slot precision, and ultimately the manufacturing technology choice.
Tecan has perfected many cost-effective manufacturing methods to produce burr and stress-free discs, with inherent mechanical strength and extreme levels of precision.
The company selects one, or a combination of these technologies depending on the level of precision demanded, to produce the optimum price to performance ratio for the specific application.
Further reading
Mini rework stencils save time and money
Mini stencils from Tecan Stencils ensure accurate repeatable paste deposits are produced when replacing components such as QFPs, PLCCs and BGAs during PCB rework operations.
Prototype micro metal parts in five days
A five-day prototype service has been launched by Tecan, offering design engineers cost-effective small sheet metal parts for a vast array of applications.
A recent example can be seen in the provision of a custom disc for a specialist designer and manufacturer of highly specialised torque transducer systems.
Liasing with Tecan engineers the company realised that a demanding encoder requirement, in a sophisticated aerospace project, could be cost-effectively satisfied, while ensuring optimum optomechanical performance.
Critical elements in the design and production of the encoder disc were the need to maintain mechanical strength under varying torque, speed and temperature conditions while ensuring fine optical resolution through high-accuracy apertures.
This was achieved by employing a two-stage photo-electroforming (PEF) process - an extremely accurate technology where metal is "grown" electrolytically atom by atom within a photolithographically defined resist mould.
Initially, the disc is photo-electroformed to a thickness of 20um, producing optical slots of the finest possible resolution.
A second PEF stage is then carried out which leaves the high-accuracy slots as they are and selectively increases the thickness of the disc in other areas.
The result is a single rigid part, with localised thickness variations across its surface to suit both optical and mechanical requirements.
In this case, as opposed to traditional photo-film techniques, Tecan employed specialised high-resolution chrome-on-glass tooling to achieve optical aperture tolerances of +/-1.6um.
PEF discs are typically thinner, lighter and more robust than discs manufactured by other means.
They feature slots with extremely smooth, yet optically sharp edges that facilitate a well defined light pulse.
Typical PEF tolerances are +/-4um, and in some cases, ultrahigh tolerances of +/-2um or less can be achieved.
• Tecan: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
