Product category:
Test Accessories
News Release from: Tektronix | Subject: P80318 and P80318X
Edited by the Electronicstalk Editorial
Team on 28 June 2005
Probes get to grips with PCB impedance
measurement
New hand probes significantly improve differential TDR measurement integrity for electrical serial data signals compared with using two single-ended probes.
Test engineers, quality engineers, manufacturing managers, and test technicians working with high speed serial buses in excess of 1Gbyte/s and who need performance validation and conformance testing of electrical impedance of PCBs, connectors, and components when mounted onto a PCB will benefit from a new high performance TDR hand probe now available for Tektronix sampling oscilloscopes The P80318 18GHz 100ohm differential impedance TDR hand probe and P80318X 18GHz 100ohm differential impedance TDR hand probe for manufacturing significantly improve differential TDR measurement integrity for electrical serial data signals compared with using two single-ended probes
This article was originally published on Electronicstalk on 19 Aug 2008 at 8.00am (UK)
Related stories
Scopes and probes answer SATA test demands
The DSA70000 series offers more four-channel performance than any alternative oscilloscopes and are ideal for high-speed serial data applications.
Waveform generators keep up the pace
Tektronix has upgraded its range of arbitrary waveform generators with two new B series AWGs that offer up to 20% performance improvements over existing instruments.
The new probes provide customers with the only adjustable pitch differential hand probe from a major manufacturer.
The ability to accommodate a wide range of differential line spacings on PCBs and superior spatial resolution provide customers the best in-circuit measurement tool for PCB traces.
PCB quality can vary within a flat due to thickness variations, warping, moisture content, and alignment issues.
Further reading
DisplayPort cable testing becomes official
Methodology eliminates the need for expensive and complicated instruments promoted by alternative solutions.
Preprocessor enables next-gen memory testing
Interposer is designed for use with Tektronix TLA7000 series logic analysis systems to enhance the debug of 1333 DIMM cards.
Analyser gives real-time spectral view
Real-time spectrum analysers are designed to offer benchtop performance on a portable handheld platform, specifically to solve problems created by digital RF technologies.
These problems are difficult to identify if users can only test on test coons at the edge of the board.
An example of a use case for P80318 is a computer manufacturer making motherboards, where SATA and PCI-Express standards are both used on each board.
The multilayer board is complex and includes strip lines and microstrip differential transmission lines.
The two types of transmission lines require different design dimensions to meet the targeted impedance goals.
The P80318 allows the test technician to measure both types of transmission lines, even though the spacing between the differential pairs is completely different.
It is easy to measure in-circuit traces due to the flexibility of the probes adjustment capability, and no circuit ground is needed for a balanced differential measurement.
The probe can resolve small spatial features for determining the differential impedance and if the differential lines are matched in length.
This capability allows the manufacturer to determine the quality of the board prior to component placement and lower manufacturing costs by not populating a board with differential impedances that are out of specification.
According to Jim Roth, Marketing Manager for the Electro-Optical Product Line at Tektronix, incorrect differential impedances, trace lengths, or impedance discontinuities are common problem that cause bit errors, or result in nonfunctional designs.
Providing customers with fast, easy to use, TDR hand probes for measurements on differential in-circuit PCB traces enables fast and accurate measurement of differential impedance and speeds the debugging of problem designs.
The Tektronix P80318/P80318X hand probes provide the ability to measure in-circuit differential lines for manufacturing or design debug.
The P80318/P80318X is designed for use with a TDS8200, CSA8200, or previous-generation mainframe and 80E04 electrical sampling module.
When used with two 80A02 static protection modules, the probes provide EOS/ESD protection.
The P80318 and P80318X are functionally the same.
The P80318X manufacturing kit includes a second probe body.
In very high volume applications, probe tips will wear over time and will need to be serviced.
The second probe body enables customers to remain operational during this service period.
Pricing for the new probes begins at GBP 2390 or Eur 3590. Request a free brochure from Tektronix ...
• Tektronix: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
