Product category:
Analogue and Mixed Signal ICs
News Release from: Torex Semiconductor | Subject: XC6120
Edited by the Electronicstalk Editorial
Team on 15 January 2008
Frugal detectors are accurate about
voltage
Compact voltage detectors are well suited for monitoring battery, power-supply and regulated system voltages.
With a typical supply current figure of only 0.6uA, the XC6120 series of voltage detectors from Torex Semiconductor offers engineers one of the lowest power consumption performances on the market The XC6120 operates over a voltage range of 0.7 to 6.0V
This article was originally published on Electronicstalk on 5 Sep 2008 at 8.00am (UK)
Related stories
Torex unveils PLL clock generator ICs
Torex Semiconductor has introduced the XC25BS8 Series of PLL clock generator ICs with built-in crystal oscillator circuit, divider circuit and multiplier PLL circuit.
The device can monitor nominal system voltages from 1.0 to 5.0V and is selectable in 0.1V increments.
Detect accuracy is +/-2% at 1.5V and above, or +/-30mV at voltages below 1.5V.
Detect voltage temperature characteristics are typically +/-100ppm/C, over the operating temperature range from -40 to +85C.
Devices within the XC6120 series are differentiated by their output logic configurations.
The XC6120C series features a CMOS output.
The XC6120N series has an N-channel open-drain output.
Available in the ultrasmall USP-3 package, as well as the SSOT-24 (SC-82), the XC6120 series is ideally suited for high-density mounting.
With low power consumption and high accuracy, devices in this series are suitable for precision mobile equipment.
In particular, these low-power circuits are well suited for monitoring battery, power-supply and regulated system voltages.
• Torex Semiconductor: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
