Visit the Clare Instruments web site
Click on the advert above to visit the company web site

Product category: Circuit Protection Devices
News Release from: Toshiba Electronics Europe | Subject: TLP7xx photocouplers
Edited by the Electronicstalk Editorial Team on 31 May 2006

Photocouplers provide totempole outputs

Request your FREE weekly copy of the Electronicstalk email newsletter. News about Circuit Protection Devices and more every issue. Click here for details.

New photocouplers are suitable for a variety of applications, including CANbus interfaces, high speed data transfer and intelligent power module signal isolation.

Toshiba Electronics Europe has expanded its TLP7xx family of the world's smallest photocouplers with three new devices that provide totempole outputs Supplied in SDIP packaging - making them 50% smaller than previous devices - the new photocouplers are suitable for a variety of applications including CANbus interfaces, high speed data transfer and intelligent power module signal isolation

All of the new photocouplers integrate a GaAlAs infra-red LED and a high-gain, high-speed photodetector within a surface mount 6-pin SDIP package measuring just 6.8 x 4.5 x 3.6mm.

Minimum isolation voltage is rated at 5kV RMS, and the totempole output stage provides both source and sink driving functionality.

The new Toshiba TLP702 and TLP706 photocouplers are suitable for isolating input control signals to intelligent power modules (IPMs) as well as meeting the requirements of industrial inverters and motor drives.

The devices are particularly well suited to industrial CAN applications as well as medium speed (5Mbit/s) data transfer.

The TLP702 provides inverter logic functionality, while the TLP706 is targeted at designs requiring buffer logic.

Both devices operate with power supply voltages of 4.5 to 20V and deliver a maximum switching time of 600ns.

The new Toshiba TLP716 photocoupler suits high-speed data transfer, making it ideal for plasma panel displays (PDPs), high-speed interfaces and factory automation equipment.

Maximum propagation delay is just 75ns, and typical switching speed is rated at 15Mbaud.

The device operates with a supply voltage of between 4.5 and 5.5V.

The new photocouplers feature an internal shield that provides a guaranteed common-mode transient immunity of 10kV/us.

All of the devices are lead-free (Pb-free) and provide guaranteed performance over a temperature range of -40 to +100C.

As with all other devices in Toshiba's TLP7xx lineup, the couplers meet international safety approvals.

In addition to the standard parts, wide pin-out versions of the new devices are available for applications requiring creepage distance and clearance of up to 8mm.

Toshiba Electronics Europe: contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
Electronicstalk Home Page

Search the Pro-Talk network of sites

Visit the Clare Instruments web site