Product category:
Frequency Control Components
News Release from: TTI Europe | Subject: SARCC***M**K(T)X*0 resonators
Edited by the Electronicstalk Editorial
Team on 21 March 2008
SAW resonators reduce errors
Resonators are the first to support the latest European Telecommunications Standards Institute standard concerning frequency error.
TTI has a new family of SAW resonators from Murata to support the design of short range devices operating in the ISM300 and ISM400 bands Brand new technology developed by Murata's Kanazawa R and D department has enabled further performance improvements in all three of the SARCC***M**K(T)X*0 resonator's main parameters: thermal coefficient has been reduced by almost 50%; resonant loss has improved by approximately 1dB; and the standard initial tolerance is now +/-50kHz compared with the previous +/-75kHz
This article was originally published on Electronicstalk on 18 Oct 2001 at 8.00am (UK)
Related stories
SM capacitor gives top high-frequency performance
TTI is offering the ground breaking AO-CAP range of aluminium-polymer surface-mount capacitors from Kemet.
These new SA resonators will support the latest ETSI (European Telecommunications Standards Institute) standard concerning frequency error - other competing solutions do not yet comply with the standard.
Two temperature ranges are available: KX-suffixed devices are targeted at the consumer market and TX products are automotive grade SAWs suitable for tyre pressure monitoring systems.
Devices with a stability of +/-50ppm are optionally available.
The new resonator family covers all commonly requested frequencies.
Devices are available in the standard 3.0 x 3.0mm 6-pin ceramic package. Request a free brochure from TTI Europe ...
• TTI Europe: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
