Terminator improves through-splice efficiency

A new terminator, specifically designed for through-splice applications, has been developed by Tyco Electronics.

A new terminator, specifically designed for through-splice applications, has been developed by Tyco Electronics.

The terminator provides fast and efficient through-splices by increasing machine access, and together with advanced levels of functionality and user-friendliness, helps to maximise production efficiency.

Incorporating all the features of Tyco's established Model G terminator, the Tyco G Terminator for through-splice applications offers increased access to both sides of the applicator - for placing and holding wires - and a new guarding system to provide full access behind the crimper, without sacrificing the safety features of standard G-Terminator machines.

Featuring an improved guard setup, mounted to the machine frame rather than the door, the versatile terminator can incorporate a motor fixture in the front, while retaining the capability to open the guard doors for applicator or precision crimp adjustments.

To prevent the use of conventional applicators in the modified machine, a keying pin is located in the applicator mounting plate.

Providing magnet wire splice capability and incorporating a total and batch counter, the terminator is capable of handling a capacity of 2224N maximum crimp force with a deflection of 0.076 maximum per 445N crimp force.

Noise levels are below 76dB at 2224N full capacity, while air supply - when required for use with air feet-applicators - should be at 6.21-7.58bar 0.00283m3/s.

Back to top