Product category:
AC/DC Power Supplies
News Release from: Unipower Europe | Subject: RW Series
Edited by the Electronicstalk Editorial
Team on 21 January 2008
Telecomms rectifiers go up the wall
Rectifiers range in output power from 290 to 700W with nominal output voltages of 12, 24 and 48V.
The RW Series of wall-mount rectifier systems from Unipower Europe is designed as an alternative to rack-mount units for powering a wide variety of telecomms equipment They are highly efficient and offer users a range of output voltages and power levels
This article was originally published on Electronicstalk on 16 Mar 2000 at 8.00am (UK)
Related stories
3kW in 2U rack from hot swap power system
The new TMN Series power system front ends from Unipower provide up to 3,000 watts at 24, 28 or 48VDC for distributed power systems.
The rectifiers range in output power from 290 to 700W with nominal output voltages of 12, 24 and 48V.
Input range for full output power is 100 to 275V AC, and active power factor correction is standard.
They may be used alone or operated in parallel to provide redundancy or higher output ratings.
They are compact, easy to install convection-cooled units and are available with temperature compensation as well as an internal low-voltage disconnect and relay-based alarm outputs.
All models meet the requirements of all relevant safety standards, including UL60950, CSA22.2 No 60950 and IEC/EN60950-1.
The RW Series units are RoHS compliant.
Products are available from Unipower's factories in both the UK and the USA. Request a free brochure from Unipower Europe ...
• Unipower Europe: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
