Product category:
EMC Components
News Release from: Vicor UK | Subject: QPO-1 QuietPower
Edited by the Electronicstalk Editorial
Team on 25 November 2002
Compact module cleans switch-mode
outputs
Vicor's new QPO-1 QuietPower output ripple attenuation module uses active filtering in a SIP package to provide better than 20dB of conducted differential noise attenuation from 60Hz to 500kHz.
Vicor's new QPO-1 QuietPower output ripple attenuation module uses active filtering in a SIP package to provide better than 20dB of conducted differential noise attenuation from 60Hz to 500kHz This QuietPower module is rated for 10A and can be used with most switch-mode power supplies with output voltages from 3 to 30V DC
This article was originally published on Electronicstalk on 3 May 2001 at 8.00am (UK)
Related stories
Adapter puts DC/DCs up to 100A on surface mount
Vicor has introduced a novel interconnect scheme.
The QPO-1 is the first product from Vicor's new power IC subsidiary, Picor Corp.
It offers the basic functionality of Vicor's popular uRAM quarter-brick module in a package one-tenth the size at one-third the price.
The QPO-1's closed-loop architecture greatly improves the load transient response of the source power supply and features precise point of load voltage regulation.
The SIP can control the source either through the remote sense leads or through the voltage trim lead.
The QPO-1 supports parallel operation for high-current requirements.
The SIP measures 25 x 25 x 5mm.
Units are surface-mountable with either land grid array or ball grid array terminations.
• Vicor UK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
