Product category:
Embedded Computing and Control
News Release from: Wordsworth Technology | Subject: Juki-C3-1G
Edited by the Electronicstalk Editorial
Team on 28 November 2005
Industrial SBC is only half-sized
The Juki-C3-1G PCISA half-size SBC (single board computer) is based on the low power embedded VIA C3 1GHz processor.
Available now from Wordsworth Technology, the Juki-C3-1G PCISA half-size SBC (single board computer) is based on the low power embedded VIA C3 1GHz processor The Juki-C3-1G implements the VIA VT8606T (PN133T) north bridge and VT82C686B south bridge chipsets
This article was originally published on Electronicstalk on 2 Feb 2007 at 8.00am (UK)
Related stories
Core Duo performance comes to COM Express
COM Express range is designed for embedded applications that require a standard processor and memory subsystem, but also the modular flexibility to retain key IP on a separate carrier board.
Mini-ITX board has host of interfaces
The Intel Pentium based Kino 6612LVDS has a tiny 170 x 170mm form factor and is compatible with a host of industry standard connectivity, multimedia and storage options.
The VT8606T chipset has an integrated ProSavage VGA controller supporting a resolution of 1920 x 1440, an AGP 4X bus and up to 32Mbyte VRAM shared with system memory.
One SODIMM provides up to 512Mbyte of system memory.
The board has a DB-15 connector for CRT display and a 20-pin connector (for 36bit dual channel LVDS) and a 50-pin header (TTL level) for LCD support.
"The Juki-C3-1G single board computer is targeted at industrial applications that require a low power and cost-effective x86 solution in a half-size SBC card form factor", said Nick Coxhead, Technical Director at Wordsworth Technology.
"This board is an excellent addition to our SBC portfolio with its wide range of connectivity options including multiple USB, RS232, digital I/O interfaces and two LAN ports", he continued.
The Juki-C3-1G supports an onboard CompactFlash type II socket and two Ethernet 10/100Mbit/s ports (optional controller from either Intel or Realtek).
In addition the Juki-C3-1G supports four RS232 ports (via pin header), three USB2.0 and two USB 1.1 ports by pin header, two ATA-100 IDE channels (IDE 1: 40-pin, IDE 2: 44-pin), one FDD connector, one LPT parallel port (via pin header), one PS/2 interface for keyboard/mouse, an IrDA port (SIR mode), and four inputs and four outputs of TTL level digital I/O.
A PC/104 connector is also provided for expansion.
A hardware monitor for CPU voltages and CPU/system fan speed and temperature detection is implemented along with power management meeting ACPI 1.1 specification, a watchdog timer and an AC97 compliant audio codec.
• Wordsworth Technology: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
