Product category:
DC/DC Convertors
News Release from: XP Power | Subject: DCC Series
Edited by the Electronicstalk Editorial
Team on 21 June 2001
Open-frame convertors deliver up to 87%
efficiency
XP has announced the immediate availability of the DCC Series of high-efficiency open-frame DC/DC convertors.
XP has announced the immediate availability of the DCC Series of high-efficiency open-frame DC/DC convertors Based on a high-efficiency topology, these single-output 15W convertors feature an industry-standard 51 x 25mm (2 x 1in) PCB mounting footprint and have a low profile of 8.9mm
This article was originally published on Electronicstalk on 30 Jul 2008 at 8.00am (UK)
Related stories
Dual-output DC/DC convertors suit military use
The MTC15 and MTC30 DC/DC convertors' feedback loop constantly monitors both outputs in order to provide a high degree of load regulation.
The DCC Series comprises devices with outputs of 1.8, 2.5, 3.3 or 5V DC, with corresponding maximum output currents of 6, 6, 4.5 and 3A.
Additionally, each output voltage can be trimmed to 90-110% of its nominal ratings.
Input voltage can range from 33 to 75V DC, and typical efficiencies are up to 87%.
The convertors enjoy all the benefits of open-frame construction, including improved thermal management, contributing to a wide operating temperature range from -40 to +70degC.
Both short-circuit and overvoltage protection are provided, and the convertors can be remotely controlled using a logic-level on/off signal.
Ripple and noise are low, at 100mV peak-peak (35mV RMS).
DCC Series convertors are ETSI compliant, meeting ETS300 132-2 input voltage and current requirements.
• XP Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
