Product category:
DC/DC Convertors
News Release from: XP Power | Subject: I-series
Edited by the Electronicstalk Editorial
Team on 01 August 2005
DC/DC convertors become RoHS compliant
Offered in a choice of board mounting, DIP or SIP, industry-standard footprint packages, the I-series of 1 and 2W isolated DC/DC convertors from XP Power are now RoHS compliant.
Offered in a choice of board mounting, DIP or SIP, industry-standard footprint packages, the I-series of 1 and 2W isolated DC/DC convertors from XP Power are now RoHS compliant These low cost products comprise over 175 models in single and dual output versions with input voltages from 3.3 to 48V DC
This article was originally published on Electronicstalk on 17 Jul 2008 at 8.00am (UK)
Related stories
Small supplies increase power density
Compact single-output 25W AC/DC power supplies are available in three configurations and with a choice of seven different outputs.
Output voltages are from 3.3 to 48V DC and efficiency is up to 80% at full load.
Ripple and noise is between 75 and 150mV peak-to-peak at 20MHz and isolation is either 3000 or 1000V DC, both characteristics dependent on the model.
Housed in UL94V0 rated cases, these compact convertors will operate from -40 to +85C ambient temperature and are convection cooled.
All versions have integral short-circuit protection.
RoHS compliance is indicated with an R in a triangle symbol on both the convertor and its packaging.
Samples are available from stock and the majority of the range is also available from Farnell InOne.
• XP Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
