Product category:
DC/DC Convertors
News Release from: XP Power | Subject: JTH15 DC/DC convertors
Edited by the Electronicstalk Editorial
Team on 12 October 2007
DC/DC convertors suit low-power designs
XP Power's JTH15 series of 15W DC/DC convertors will suit most environments without the need for additional heat sinking or airflow.
XP Power has released the JTH15 series of 15W DC/DC convertors Fitting into a metal-cased, compact 50.8 x 25.4mm footprint, they are suited to low-power, board-mounted designs
This article was originally published on Electronicstalk on 8 Feb 2001 at 8.00am (UK)
Related stories
Mil-Spec DC/DC convertors live long and prosper
Instead of using optocouplers, XP's full Mil-Spec DC/DC convertors use a patented magnetic feedback solution to deliver long-term reliability.
The series can accommodate a wide 4:1 range of input voltages.
Both single and dual-output versions are available.
The single-output device is available with +3.3, +5, +12 or +15V rails, while the dual version has +/-5, +/-12 or +/-15 outputs.
Models are fully regulated, with a line regulation of +/-0.5% and a load regulation of +/- 0.5%, 10-100% load.
Input to output isolation is rated at 1500V DC.
The JTH15 series will suit most environments without the need for additional heat sinking or airflow.
The units operate from -40C to +100C, with derating above +60C.
The convertors are suited to a broad range of wireless, communication and industrial applications.
The convertors also offer the customer the option of a more powerful, drop-in replacement for older 10W convertors with the same footprint.
• XP Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
