Product category:
Embedded Computing and Control
News Release from: Z-World | Subject: RN1100 RabbitNet digital I/O card
Edited by the Electronicstalk Editorial
Team on 07 July 2003
Card expands digital I/O
The RN1100 RabbitNet digital I/O card is the first in a series of RabbitNet expansion products for use with the latest Z-World single-board computers and operator interfaces.
The RN1100 RabbitNet digital I/O card is the first in a series of RabbitNet expansion products for use with the latest Z-World single-board computers (BL2500) and operator interfaces (OP7200) RabbitNet is an I/O expansion mechanism based on three-wire, full duplex technology, and using low cost, off-the-shelf Ethernet cables
This article was originally published on Electronicstalk on 16 Aug 2002 at 8.00am (UK)
Related stories
SBC for reliable embedded control - anywhere
The LP3500 Fox is a low-power single-board computer designed to operate reliably virtually any place it is deployed, especially where power is limited.
Data are transmitted at 1Mbit/s to a maximum recommended distance of 10m.
When used with a compatible Z-World single-board computer or operator interface acting as a master, RabbitNet can be used to expand the amount of available I/O, or increase the distance from the master device to the I/O points.
Easily mounted on a 100mm DIN rail tray (100 x 90 x 17mm), the RN1100 features a ruggedised I/O set consisting of 24 inputs and 16 sink/source outputs.
Four 10bit buffered analogue input channels are also included.
The RN1100 is priced at $73 (100-off).
A low-cost connectivity kit is available for $18 that contains friction lock connectors and crimp terminals.
• Z-World: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
